CML2 でノード起動前にコンフィグを設定する

CML2 ではノードを起動する前に、予めコンフィグを設定しておくことが可能です。今回はその手順をメモしておきます。今回は IOSv (15.9) を使って検証しました。

IOSv の初期コンフィグ
CML2 上から初期コンフィグを設定する
ノード起動後のコンフィグ (初回)
ノード起動後のコンフィグ (二回目以降)

IOSv の初期コンフィグ

IOSv の初期コンフィグは以下でした。

version 15.9
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
ip cef
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
 no ip address
 shutdown
 duplex auto
 speed auto
 media-type rj45
!
interface GigabitEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
 media-type rj45
!
interface GigabitEthernet0/2
 no ip address
 shutdown
 duplex auto
 speed auto
 media-type rj45
!
interface GigabitEthernet0/3
 no ip address
 shutdown
 duplex auto
 speed auto
 media-type rj45
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
ipv6 ioam timestamp
!
!
!
control-plane
!
banner exec ^C
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************^C
banner incoming ^C
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************^C
banner login ^C
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************^C
!
line con 0
line aux 0
line vty 0 4
 login
 transport input none
!
no scheduler allocate
!
end

CML2 上から初期コンフィグを設定する

CML2 でラボを作成してノードを配置した後、以下の手順で操作します。

事前コンフィグを設定したいノードを選択する
EDIT CONFIG を選択する
事前コンフィグを入力する
(このままだとコンフィグ右上に Unsaved changes と表示されたままになるので) SAVE を選択し、コンフィグを保存する

今回は以下のコンフィグを入力しました。

hostname IOSv
!
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
!
logging buffered 65536 debugging
!
clock timezone JST +9
!
no ip domain-lookup
!
no banner exec ^C
no banner incoming ^C
no banner login ^C
!
line con 0
 exec-timeout 300 0
 privilege level 15
 logging synchronous
 length 0
!
line vty 0 4
 exec-timeout 300 0
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
scheduler allocate
!
end

ノード起動後のコンフィグ (初回)

IOSv# show running-config
Building configuration...

Current configuration : 1256 bytes
!
version 15.9
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
no service password-encryption
!
hostname IOSv
!
boot-start-marker
boot-end-marker
!
!
logging buffered 65536
!
no aaa new-model
!
!
!
clock timezone JST 9 0
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip cef
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
 no ip address
 shutdown
 duplex auto
 speed auto
 media-type rj45
!
interface GigabitEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
 media-type rj45
!
interface GigabitEthernet0/2
 no ip address
 shutdown
 duplex auto
 speed auto
 media-type rj45
!
interface GigabitEthernet0/3
 no ip address
 shutdown
 duplex auto
 speed auto
 media-type rj45
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
ipv6 ioam timestamp
!
!
!
control-plane
!
!
line con 0
 exec-timeout 300 0
 privilege level 15
 logging synchronous
 length 0
line aux 0
line vty 0 4
 exec-timeout 300 0
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
scheduler allocate 20000 1000
!
end

ノード起動後のコンフィグ (二回目以降)

IOSv の場合、コンフィグを保存した後で再起動すると以下の挙動になりました。

変更したコンフィグは反映されている
しかし、仮に banner は削除してあっても復活してしまう